These safety in steel guidelines are published as an information service only and without assuming duty of care. These guidelines, published by the Steel Institute of Australia Inc. contain general information only and should not be relied upon as a substitute for legal or other professional advice.
Information Sheet No 1
Safety guidelines for the use of fixed lever chain load binders.
Information sheet contains tightening, releasing and simple do''s and don''ts.
Information Sheet No 2
Safety guidelines for the use of clamps in the handling of hard steel plates (eg Quench & tempered high strength and abrasion resistant, high carbon grades) with a smooth, shiny or slippery surface.
Information Sheet No 3
Safety guidelines for the restraining of mixed loads for the steel industry, provides a brief introduction to the key elements of load restraint, and the requirements of the load restraint guide.
Information Sheet No 4
Safety guidelines for loading and restraining loads for sedans, utes, trucks, vans and trailers. Sheet provides guidance on acceptable maximum safe overhangs and unacceptable practices.
Information Sheet No 5
Safety guidelines for the spacing and storage of steel coils with their bore either vertical or horizontal in a simple to read A3 sized laminated wall chart.
A copy of any information sheet is available from your nearest OneSteel Metaland store.
